project-image
project-image
project-image

  • Design
  • Selection of equipment, installation and delivery
  • Installation and adjustment
  • Maintenance and repair
  • Detailed study of existing electrical installations
  • Renovation and modernization of electrical equipment
  • Training of personnel to work with new equipment

Istek Engineering provides high-quality services for the design, installation and maintenance of low-voltage electrical systems and equipment (up to 1 kV), ensures uninterrupted and safe power supply and operation of electrical networks of both residential and industrial facilities. Service types include:

  • Installation and maintenance of stationary and power equipment, as well as conversion and distribution facilities.
  • Installation and maintenance of networks and control systems, protection, automation, measurement and signaling.
  • Power cables of direct and alternating current.
  • Networks of outdoor and indoor lighting, all types of grounding and installation of circuits.
  • Installation, reconstruction and modernization of electrical equipment and electrical installations.
  • Repair of shipping and production control devices.
  • Work to extend the life of equipment.
  • Supply, installation and maintenance of uninterruptible power supplies and generators.

We offer only high quality, safe products from certified and well-known manufacturers, in accordance with government regulations.

  • Distribution control devices (automation and electricity metering, etc.), low-voltage power distribution equipment (distribution boards and premises), switchgear equipped with movable modules in the form of blocks or boxes, as well as low-voltage combined equipment (hydraulic and pneumatic integrated power source), etc. including low voltage switchgear .
  • Prevent potential damage to electrical equipment with automatic disconnection from the power cycle and fuses to prevent overloading of the wiring and mains due to a single current split.
  • Differential protection devices that provide protection against electric current in contact with various electrical appliances in case of insulation damage.
  • Signaling devices (sockets, switches, plugs, switches) that allow you to control the on and off of electricity in the network and control household and professional electrical appliances
  • Voltage stabilizers and converters that improve poor power quality by adjusting the power factor to keep equipment running smoothly.
  • Transformers and power supplies used to convert AC to DC and reduce high voltages, which prevents devices from overheating and losses from short circuits or voltage surges. - Electricity meters that reduce the cost of electricity consumed and service networks.
  • Cables and low voltage wires used for connection to networks with voltage up to 380V belong to internal electrical installations.

Istec Engineering provides installation and maintenance services for medium voltage equipment in a variety of industrial and commercial environments. We install medium voltage equipment (6-35 kV) in power plants, industrial plants, construction and transport facilities, as well as any other objects protected from high voltage. The list of our services includes installation and commissioning of the following facilities:

  • Installation, commissioning and commissioning
  • Cables (power, control and lighting)
  • Network devices abroad and at home
  • Dispenser in a metal case - external and internal, fixed and withdrawable
  • Power transformers, current transformers and voltage transformers
  • Separators
  • Keys
  • Repair and maintenance of equipment

We offer medium voltage switchgears for supplying, receiving and distributing power to main transmitters and low voltage systems, including:

  • Equipment for single-sided mounting of cameras
  • Switching and measuring devices
  • Prefabricated and combined busbar system
  • emergency fire extinguishing devices
  • auxiliary devices
  • Protection devices for automation, telemechanics and communications

Installation work performed by a staff of highly qualified engineers, and all equipment meets modern quality and energy security standards, ensuring reliable and safe operation of the installed power supply systems.

Istec Engineering provides installation services for high voltage equipment (110 - 154 kV) including the following facilities, including 110/35/10 kV, 110/35 kV and 110/10(6) kV l / s:

  • Power transformers of various designs, voltages and volumes
  • Auxiliary transformers
  • Batteries with permanent capacitors
  • Reactive power compensators
  • Open and closed network devices
  • Metal-sheathed switchgear sections for outdoor and indoor installation
  • Vacuum and SF6 electrical switches
  • Disconnectors with one or two earthing knives, electrical or mechanical sliding
  • Energy discharge devices with an energy discharge counter

When installing substations, we also install:

  • Insulation
  • Assembling the busbar (busbar) system
  • linear accessories
  • Equipment clamps
  • Portals
  • Surface ring of all substations and electrical equipment
  • Projector tower with lightning rod
  • Battery comes with adapter
  • High frequency limiter with contact filter
  • High frequency nozzle with connection filter
  • Bus Bar Distribution System
  • Relay protection, automation and measurement
  • Connection of secondary switchgear and electrical cables (0.4 kV)

We carry out all power supply projects taking into account the needs and requirements of our customers, and we have strict requirements for the installation, operation, maintenance and repair of high voltage equipment. In addition, we test installed power systems and diagnose existing systems so that the system can detect and prevent faults. All installation and repair work is carried out by our qualified specialists to ensure reliable and uninterrupted operation of the electrical installation system.

İSTEK Engineering manufactures, assembles and installs power and control panels of any complexity (up to 4000A) and uses components for assembling panels from world manufacturers. Panel assembly is carried out by highly qualified personnel in accordance with the project specification, international technical standards and local codes and requirements. We offer our customers high quality components, we control and guarantee the best quality of our products.

We assemble and install the following panels:

  • Main switchboard (MSB): Receives and distributes electricity in a building or part of a building in a three-phase AC network with a voltage of 380/220V - 660/380V and a frequency of 50Hz. Basic switchboards include automatic emergency protection against any multiple loads and short circuit power measurement devices.
  • Electricity Distribution Boards (SHRP): Receives and distributes electricity between the electrical groups of the building, keeps records of power in three-phase alternating current networks 380/220V and above 50Hz, provides line protection against short circuits and overloads. The switchboard is installed at the input of the power cable.
  • Automatic Transmission Switch (ATS): Automatically switches to traction power when main power is cut or power is lost, and returns to main power when restored. ATS provides continuous monitoring of the presence of voltage in the main and rear power supply circuits, compares voltages and determines voltage readings and detects anomalies.
  • Distribution boards for multi-storey buildings: It receives electricity on the floor and transmits it to the distribution boards of apartments on the floors of the building.
  • Shields for cutting floors in multi-storey buildings: metering and distribution of electricity in apartments, cottages or houses.
  • Lighting control panel: accepts and distributes AC power with a frequency of 50 Hz, and also turns on / off group circuits, breaks electrical circuits, protects AC networks from overloads and malfunctions.
  • Uninterruptible Power Supply (UPS): Provides uninterrupted power to critical equipment and facilities such as computers, control and monitoring systems, medical equipment, alarms, and other systems.
  • Auxiliary Power Plant (APU): Provides AC power (0.4kV) for power plant equipment (lighting, heating, etc.) and auxiliary substations.
  • control panels: engineering equipment, technological processes, alarms, data transmission to the control center, execution of operator orders, distribution and consumption of electricity, protection and automation of equipment and many other operations.

It is extremely important to use only high-quality and certified equipment and cables to prevent incidents in the future when designing and operating power systems. Power supply means providing consumers with high-quality electricity 24 hours a day. The design of the power supply system must be completed before repair work is carried out.

Power supply includes power sources, step-up or step-down substations, transformers, power distribution networks, various communications and facilities.

Our company carries out installation of DC and AC power lines, installation of internal and external (air and cable) lighting networks, installation of grounding devices related to all types of grounding circuits.

Engineers (specialists) of our company provide professional services for the efficient use of electricity in all types of buildings.

(+994 50) 228-16-06

(+994 12) 310-83-88

info@istekgroup.az